Chapter 1 Getting to Know Your NSA
NSA320 User’s Guide
26
1.3.1 COPY/SYNC Button
Use the COPY/SYNC button on the front panel to copy or synchronize files
between a connected USB device and the NSA. See Section 9.10 on page 216 for
more details on how to configure the copy/sync settings.
HDD1/
HDD2
Green On The hard disk drive is connected properly to the NSA.
Blinking The NSA is saving data to the hard disk drive.
Red On The NSA detected an error on the hard disk drive (like a bad
sector for example). The NSA automatically tries to recover a bad
sector, but the LED stays red until the NSA restarts.
Off The NSA cannot detect a hard disk in the disk bay.
USB Green On The USB device is connected properly to the NSA.
Blinking The NSA is saving data to the USB device.
Red On The USB device has failed and the NSA can no longer
detect it.
Off No USB device connected to the USB port.
LAN Green On The NSA has a successful 10/100 Mbps Ethernet
connection.
Blinking The 100M LAN is sending or receiving packets.
Off The NSA does not have a 10/100 Mbps Ethernet
connection.
Amber On The NSA has a successful 1000 Mbps Ethernet
connection.
Blinking The 1000 M LAN is sending or receiving packets.
Off The NSA does not have a 1000 Mbps Ethernet
connection.
COPY/
SYNC
Green On A USB device is connected to the NSA.
Blinking The NSA is copying or synchronizing files to or from the
USB device.
Red On Copying or synchronizing files to or from the USB device
failed.
Off No USB device is connected.
Table 1 LEDs (continued)
LED COLOR STATUS DESCRIPTION