Filter
Top Products
Chapter 2 NAS Starter Utility
NSA320 User’s Guide
46
Click Configure network setting in the main utility screen to display the
following screen.
Figure 34 NAS Starter Utility > Configure network setting
The following table describes the labels in this screen.
Table 5 NAS Starter Utility > Config
LABEL DESCRIPTION
NAS Name Specify a name to uniquely identify the NSA on your network. You can
enter up to 15 alphanumeric characters with minus signs allowed but
not as the last character. The name must begin with an alphabetic
character (a-z) and is case sensitive.
Get IP
automatically
from DHCP
server
Select this if the NSA is automatically assigned an IP address from the
ISP or a DHCP server in your network.
Assign IP
Manually
Select this if you want to assign the NSA a fixed IP address, subnet
mask and default gateway.
Note: Do not configure an IP address that is already in use in your
network. This results to a network IP address conflict and
makes the NSA inaccessible.
Use DNS server
from DHCP
server
Domain Name System (DNS) is for mapping a domain name to its
corresponding IP address and vice versa. Select this if the NSA is
automatically given DNS information from the ISP or a DHCP server in
your network.
Assign DNS
server manually
If you were given specific IP address(es) of the DNS server(s), select
this and enter the primary and secondary DNS in the corresponding
fields.
PPPoE Click this if your Internet connection requires you to enter a user name
and password to connect to the Internet.