Filter
Top Products
Chapter 2 NAS Starter Utility
NSA320 User’s Guide
31
2.4 Main NAS Starter Utility Screen
The main NAS Starter Utility screen displays after you select a NSA in the NSA
Discovery screen.
Figure 5 NAS Starter Utility Main Screen
The following table describes the labels in this screen.
Table 3 NAS Starter Utility Main Screen
LABEL DESCRIPTION
Discovery Click this to use the NSA Discovery screen (Section 2.3 on page 29) to
find and select the NSA on your network to which you want to connect.
bar The bar shows the NSA’s in-use and remaining storage capacity.
Name This is the server name you configured for the NSA. If you have more
than one NSA in your network, it is recommended that you give each
one a unique name for identification purposes.
Firmware This shows the version of firmware the NSA is currently using.
IP address This is the current IP address of the NSA.
Status This shows whether the NSA is Online, Unreachable, Configuring,
or Config Failed.
NAS Discovery Click this to use the NSA Discovery screen (Section 2.3 on page 29) to
find and select the NSA on your network to which you want to connect.
Import files or
folders with
zPilot
Click this to launch zPilot to drag and drop files onto the NSA.
Add a network
drive to My
Computer
Click this to add the NSA as a network drive in your computer’s
Windows Explorer.
Manage the
device
Click this to log into the advanced administration screens. See Section
3.5 on page 66 for details on the administration screens.