Filter
Top Products
ZyAIR B-500 Wireless Access Point User’s Guide
12-4 LAN Setup
Table 12-2 Menu 3.5 Wireless LAN Setup
FIELD DESCRIPTION EXMAPLE
Default Key Enter the key number (1 to 4) in this field. Only one key can be enabled at any
one time. This key must be the same on the ZyAIR and the wireless stations
to communicate.
1
Key 1 to Key 4 The WEP keys are used to encrypt data. Both the ZyAIR and the wireless
stations must use the same WEP key for data transmission.
If you chose 64-bit WEP in the WEP Encryption field, then enter any 5 ASCII
characters or 10 hexadecimal characters ("0-9", "A-F").
If you chose 128-bit WEP in the WEP Encryption field, then enter 13 ASCII
characters or 26 hexadecimal characters ("0-9", "A-F").
Enter “0x” before the key to denote a hexadecimal key.
Don’t enter “0x” before the key to denote an ASCII key.
0x12345abc
de
Authen.
Method
Press [SPACE BAR] to select Auto, Open System Only or Shared Key Only
and press [ENTER].
This field is N/A if WEP is not activated.
If WEP encryption is activated, the default setting is Auto.
Auto
Edit MAC
Address Filter
Press [SPACE BAR] to select Yes and press [ENTER] to display menu 3.5.1.
See the section on MAC address filter for more information.
No
Edit Roaming
Configuration
Press [SPACE BAR] to select Yes and press [ENTER] to display menu 3.5.2.
See the section on roaming configuration for more information.
No
Block Intra-
BSS Traffic
Press [SPACE BAR] to select Yes or No and press [ENTER]. No
Number of
Association
Stations
Enter the number of association stations. The number should be from 1 to 32.
32
Output Power
Press [SPACE BAR] to select 11dBm, 14dBm or 17dBm and press [ENTER]. 17dBm
Preamble
Press [SPACE BAR] to select a preamble type. Choices are Long and
Dynamic.
See the section on preamble for more information.
Long