Filter
Top Products
ZyAIR B-500 Wireless Access Point User’s Guide
IP 7-1
Chapter 7
IP Screen
This chapter discusses how to configure IP on the ZyAIR
7.1 Factory Ethernet Defaults
The Ethernet parameters of the ZyAIR are preset in the factory with the following values:
• IP address of 192.168.1.2
• Subnet mask of 255.255.255.0 (24 bits)
These parameters should work for the majority of installations.
7.2 TCP/IP Parameters
7.2.1 IP Address and Subnet Mask
Refer to the section on IP address and subnet mask in the Wizard Setup chapter for this information.
7.3 Configuring IP
Click IP to display the screen shown next.
Figure 7-1 IP Setup