Filter
Top Products
ZyAIR B-500 Wireless Access Point User’s Guide
Wireless Security 6-19
Table 6-7 Wireless: 802.1x + Static WEP
LABEL DESCRIPTION
Authentication
Databases
The authentication database contains wireless station login information. The local user
database is the built-in database on the ZyAIR. The RADIUS is an external server.
Use this drop-down list box to select which database the ZyAIR should use (first) to
authenticate a wireless station.
Before you specify the priority, make sure you have set up the corresponding
database correctly first.
Select Local User Database Only to have the ZyAIR just check the built-in user
database on the ZyAIR for a wireless station's username and password.
Select RADIUS Only to have the ZyAIR just check the user database on the specified
RADIUS server for a wireless station's username and password.
Select Local first, then RADIUS to have the ZyAIR first check the user database on
the ZyAIR for a wireless station's username and password. If the user name is not
found, the ZyAIR then checks the user database on the specified RADIUS server.
Select RADIUS first, then Local to have the ZyAIR first check the user database on
the specified RADIUS server for a wireless station's username and password. If the
ZyAIR cannot reach the RADIUS server, the ZyAIR then checks the local user
database on the ZyAIR. When the user name is not found or password does not match
in the RADIUS server, the ZyAIR will not check the local user database and the
authentication fails.
6.15 Configuring 802.1x
In order to configure and enable 802.1x; click the WIRELESS link under ADVANCED to display the
Wireless screen. Select 802.1x + No WEP from the Security list.