Filter
Top Products
ZyAIR B-500 Wireless Access Point User’s Guide
3-4 Wizard Setup
Table 3-2 Wizard 2 : Wireless LAN Setup
LABEL DESCRIPTION
Choose Channel
ID
To manually set the ZyAIR to use a channel, select a channel from the drop-down list
box. Open the Channel Usage screen to make sure the channel is not already used
by another AP or independent peer-to-peer wireless network.
To have the ZyAIR automatically select a channel, click Scan instead.
Scan Click this button to have the ZyAIR automatically scan for and select a channel with
the least interference.
Security
The level of Security can be selected as none, basic or extended. Choose No
security to have no wireless LAN security configured and proceed to the ISP
Parameters for Internet Access screen.
Choose Basic security if you want to configure WEP Encryption parameters.
Choose Extend security to configure a Pre-Shared Key.
The third screen varies depending on which security level you select.
Back
Click Back to return to the previous screen.
Next
Click Next to continue.
The wireless stations and ZyAIR must use the same ESSID, channel ID and WEP
encryption key or pre-shared key (if wireless security is enabled) for wireless
communication.
3.4 Wizard Setup: Screen 3
Basic Security
If you choose Basic, you can setup WEP Encryption parameters.