Filter
Top Products
ZyAIR B-500 Wireless Access Point User’s Guide
15-2 System Security
Figure 15-3 Menu 23.2 System Security : RADIUS Server
The following table describes the fields in this menu.
Table 15-1 Menu 23.2 System Security : RADIUS Server
FIELD DESCRIPTION EXAMPLE
Authentication Server
Active
Press [SPACE BAR] to select Yes and press [ENTER] to enable
user authentication through an external authentication server.
No
Server Address Enter the IP address of the external authentication server in
dotted decimal notation.
10.11.12.13
Port
The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network
administrator instructs you to do so with additional information.
1812
Shared Secret Specify a password (up to 31 alphanumeric characters) as the
key to be shared between the external authentication server and
the access points.
The key is not sent over the network. This key must be the same
on the external authentication server and ZyAIR.
Accounting Server
Active
Press [SPACE BAR] to select Yes and press [ENTER] to enable
user authentication through an external accounting server.
No
Server Address Enter the IP address of the external accounting server in dotted
decimal notation.
10.11.12.13
Menu 23.2 - System Security - RADIUS Server
Authentication Server:
Active= No
Server Address= 10.11.12.13
Port #= 1812
Shared Secret= ?
Accounting Server:
Active= No
Server Address= 10.11.12.13
Port #= 1813
Shared Secret= ?
Press ENTER to Confirm or ESC to Cancel: