Filter
Top Products
ZyAIR B-500 Wireless Access Point User’s Guide
LAN Setup 12-7
12.3.2 Configuring Roaming
Enable the roaming feature if you have two or more ZyAIRs on the same subnet. Follow the steps below to
allow roaming on your ZyAIR.
Step 1. From the main menu, enter 3 to display Menu 3 – LAN Setup.
Step 2. Enter 5 to display Menu 3.5 – Wireless LAN Setup.
Figure 12-6 Menu 3.5 Wireless LAN Setup
Step 3. Move the cursor to the Edit Roaming Configuration field. Press [SPACE BAR] to select Yes
and then press [ENTER]. Menu 3.5.2 – Roaming Configuration displays as shown next.
Figure 12-7 Menu 3.5.2 Roaming Configuration
The following table describes the fields in this menu.
Menu 3.5.2 - Roaming Configuration
Active= Yes
Port #= 16290
Press ENTER to Confirm or ESC to Cancel:
Menu 3.5 - Wireless LAN Setup
ESSID= Wireless
Hide ESSID= No Edit MAC Address Filter= No
Channel ID= CH06 2437MHz
Edit Roaming Configuration= Yes
RTS Threshold= 2432 Block Intra-BSS Traffic= No
Frag. Threshold= 2432 Number of Associated Stations= 32
WEP Encryption= 64-bit WEP Output Power= 17dBm
Default Key= 1 Preamble= Long
Key1= ********
Key2= ********
Key3= ********
Key4= ********
Authen. Method= Auto
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.