Filter
Top Products
Chapter 10 Interface
ZyWALL USG 300 User’s Guide
212
10.6.3 PPPoE/PPTP Interface Summary
" You have to set up an ISP account before you create a PPPoE/PPTP
interface.
This screen lists every PPPoE/PPTP interface. To access this screen, click Network >
Interface > PPPoE/PPTP.
Figure 139 Network > Interface > PPPoE/PPTP
Each field is described in the table below.
Table 59 Network > Interface > PPPoE/PPTP
LABEL DESCRIPTION
# This field is a sequential value, and it is not associated with any interface.
Name This field displays the name of the interface.
Base Interface This field displays the interface on the top of which the PPPoE/PPTP interface
is.
Account Profile This field displays the ISP account used by this PPPoE/PPTP interface.
Add icon This column lets you create, edit, remove, activate, deactivate, connect and
disconnect interfaces.
To create an interface, click the Add icon at the top of the column. The PPPoE/
PPTP Interface Add/Edit screen appears.
To edit an interface, click the Edit icon next to it. The PPPoE/PPTP Interface
Add/Edit screen appears.
To remove an interface, click the Remove icon next to it. The ZyWALL confirms
you want to remove it before doing so.
To activate or deactivate an interface, click the Active icon next to it. Make sure
you click Apply to save and apply the change.
To connect or disconnect an interface, click the Connect icon next to it. You
might use this icon to test the interface or to manually establish the connection
for a Dial-on-Demand PPPoE/PPTP interface.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.