Filter
Top Products
Appendix B Log Descriptions
ZyWALL USG 300 User’s Guide
683
Access control rule %d
of %s was moved to %d.
An access control rule was moved successfully.
1st %d is the previous index .
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
2nd %d is current previous index.
SNMP trap can not be
sent successfully
Cannot send a SNMP trap to a remote host due to network error
Table 248 System Logs
LOG MESSAGE DESCRIPTION
Port %d is up!! When LINK is up, %d is the port number.
Port %d is down!! When LINK is down, %d is the port number.
%s is dead at %s A daemon (process) is gone (was killed by the operating system).
1st %s: Daemon Name, 2nd %s: date+time
%s process count is
incorrect at %s
The count of the listed process is incorrect.
1st %s: Daemon Name, 2nd %s: date+time
%s becomes Zombie at
%s
A process is present but not functioning.
1st %s: Daemon Name, 2nd %s: date+time
When memory usage exceed threshold-max, memory usage reaches
%d%% :mem-threshold-max.
When disk usage exceeds threshold-max, %s: Partition name file
system usage reaches %d%%: disk-threshold-max.
When memory usage drops below threshold-min, System Memory
usage drops below the threshold of %d%%: mem-threshold-min.
When disk usage drops below threshold-min, %s: partition_name file
system drops below the threshold of %d%%: disk-threshold-min.
DHCP Server executed
with cautious mode
enabled
DHCP Server executed with cautious mode enabled.
DHCP Server executed
with cautious mode
disabled
DHCP Server executed with cautious mode disabled.
Received packet is not
an ARP response packet
A packet was received but it is not an ARP response packet.
Receive an ARP
response
The device received an ARP response.
Receive ARP response
from %s (%s)
The device received an ARP response from the listed source.
The request IP is: %s,
sent from %s
The device accepted a request.
Received ARP response
NOT for the request IP
address
The device received an ARP response that is NOT for the requested IP
address.
Receive an ARP
response from the
client issuing the
DHCP request
The device received an ARP response from the client issuing the
DHCP request.
Table 247 Built-in Services Logs (continued)
LOG MESSAGE DESCRIPTION