Chapter 14 Zones
ZyWALL USG 300 User’s Guide
247
14.3 Zone Add/Edit
The Zone Add/Edit screen allows you to define a zone or edit an existing one. To access this
screen, go to the Zone screen (see Section 14.2 on page 246), and click either the Add icon or
an Edit icon.
Figure 162 Network > Zone > Edit
The following table describes the labels in this screen.
Table 76 Network > Zone > Edit
LABEL DESCRIPTION
Name Type the name used to refer to the zone. You may use 1-31 alphanumeric
characters, underscores(
_), or dashes (-), but the first character cannot be a
number. This value is case-sensitive.
Block Intra-zone
Traffic
Select this check box to block network traffic between members in the zone.
Member List Available lists the interfaces that do not belong to any zone. The word in front of
the name indicates whether this member is an interface or a VPN tunnel.
IFACE - this member is an interface.
IPSEC - this member is a VPN tunnel.
Select any interfaces that you want to add to the zone you are editing, and click the
right arrow button to add them.
Member lists the interfaces that belong to the zone. Select any interfaces that you
want to remove from the zone, and click the left arrow button to remove them.