Filter
Top Products
Chapter 34 User/Group
ZyWALL USG 300 User’s Guide
514
Figure 377 Web Configurator for Non-Admin Users
The following table describes the labels in this screen.
Table 164 Web Configurator for Non-Admin Users
LABEL DESCRIPTION
User-defined
lease time (max
... minutes)
Access users can specify a lease time shorter than or equal to the one that you
specified. The default value is the lease time that you specified.
Renew Access users can click this button to reset the lease time, the amount of time
remaining before the ZyWALL automatically logs them out. The ZyWALL sets this
amount of time according to the
• User-defined lease time field in this screen
• Lease time field in the User Add/Edit screen (see Section 34.2.1 on page 506)
• Lease time field in the Setting screen (see Section 34.4 on page 510)
Updating lease
time
automatically
This box appears if you checked the Allow renewing lease time automatically
box in the Setting screen. (See Section 34.4 on page 510.) Access users can
select this check box to reset the lease time automatically 30 seconds before it
expires. Otherwise, access users have to click the Renew button to reset the lease
time.
Remaining time
before lease
timeout
This field displays the amount of lease time that remains, though the user might be
able to reset it.
Remaining time
before auth.
timeout
This field displays the amount of time that remains before the ZyWALL
automatically logs the access user out, regardless of the lease time.