Filter
Top Products
Chapter 34 User/Group
ZyWALL USG 300 User’s Guide
511
The following table describes the labels in this screen.
Table 162 User/Group > Setting
LABEL DESCRIPTION
User Default
Setting
User Type Select the default user type when you create a new user account. You can still
change the user type for each user account.
Lease Time Select the default lease time when you create a new user account. You can specify
1 to 1440 minutes. You can enter 0 to make the number of minutes unlimited. You
can still change the lease time for each user account.
Reauthentica
tion Time
Select the default reauthentication time when you create a new user account. You
can specify 1 to 1440 minutes. You can enter 0 to make the number of minutes
unlimited. You can still change the reauthentication time for each user account.
User Logon
Setting
Limit ... for
administratio
n account
Select this check box if you want to set a limit on the number of simultaneous logins
by admin users. If you do not select this, admin users can login as many times as
they want at the same time using the same or different IP addresses.
Maximum
number per
administratio
n account
This field is effective when Limit ... for administration account is checked. Type
the maximum number of simultaneous logins by each admin user. The number
must be between 1 and 1024.
Limit ... for
access
account
Select this check box if you want to set a limit on the number of simultaneous logins
by non-admin users. If you do not select this, access users can login as many times
as they want as long as they use different IP addresses.
Maximum
number per
access
account
This field is effective when Limit ... for access account is checked. Type the
maximum number of simultaneous logins by each access user. The number must
be between 1 and 1024.
User Lockout
Setting
Enable logon
retry limit
Select this check box to set a limit on the number of times each user can login
unsuccessfully (for example, wrong password) before the IP address is locked out
for a specified amount of time.
Maximum
retry count
This field is effective when Enable logon retry limit is checked. Type the
maximum number of times each user can login unsuccessfully before the IP
address is locked out for the specified lockout period. The number must be
between 1 and 99.
Lockout
period
This field is effective when Enable logon retry limit is checked. Type the number
of minutes the user must wait to try to login again, if logon retry limit is enabled
and the maximum retry count is reached. This number must be between 1 and
65,535 (about 45.5 days).
User
Miscellaneous
Setting
Allow
renewing
lease time ...
Select this check box if access users can renew lease time automatically, as well
as manually, simply by checking the Updating lease time automatically check
box on their screen.
Enable user
idle detection
This is applicable for access users.
Select this check box if you want the ZyWALL to monitor how long each access
user is logged in and idle (in other words, there is no traffic for this access user).
The ZyWALL automatically logs out the access user once the User idle timeout
has been reached.