Filter
Top Products
Chapter 44 Service Control
ZyWALL USG 300 User’s Guide
590
Figure 428 System > WWW
The following table describes the labels in this screen.
Table 206 System > WWW
LABEL DESCRIPTION
HTTPS
Enable Select the check box to allow or disallow the computer with the IP address that
matches the IP address(es) in the Service Control table to access the ZyWALL
web configurator using secure HTTPs connections.
Server Port The HTTPS server listens on port 443 by default. If you change the HTTPS server
port to a different number on the ZyWALL, for example 8443, then you must notify
people who need to access the ZyWALL web configurator to use “https://ZyWALL
IP Address:8443” as the URL.
Authenticate
Client
Certificates
Select Authenticate Client Certificates (optional) to require the SSL client to
authenticate itself to the ZyWALL by sending the ZyWALL a certificate. To do that
the SSL client must have a CA-signed certificate from a CA that has been imported
as a trusted CA on the ZyWALL (see Section 44.5.5 on page 595 on importing
certificates for details).
Server
Certificate
Select a certificate the HTTPS server (the ZyWALL) uses to authenticate itself to
the HTTPS client. You must have certificates already configured in the My
Certificates screen.
Redirect HTTP
to HTTPS
To allow only secure web configurator access, select this to redirect all HTTP
connection requests to the HTTPS server.