Filter
Top Products
150 CHAPTER 6: USING ROUTING PROTOCOL COMMANDS
undo default cost
View
RIP view
Parameter
value Enter the default routing cost, in the range 1 to 16. The default is 1.
Description
Use the default cost command to set the default routing cost of an imported
route.
Use the undo default cost command to restore the default value.
If you do not specify a routing cost when using the import-route command, the
default cost you specify here is used.
Related command: import-route.
Example
To set the default routing cost of the imported route of another routing protocol
to 3, enter the following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]rip
[4500-rip]default cost 3
display rip Syntax
display rip
View
All views
Parameter
None
Description
Use the display rip command to view the current RIP running state and its
configuration information.
Example
To display the current running state and configuration information of RIP, enter the
following:
<4500>display rip
RIP is running
public net VPN-Instance
Checkzero is on Default cost : 1
Summary is on Preference : 100
Period update timer : 30
Timeout timer : 180