Filter
Top Products
210 CHAPTER 9: USING STACK COMMANDS
displayed on the console port of a device, an asterisk (*) next to the unit ID
indicates the current device.
Example
To display fabric information on the console port of unit 1, enter the following:
[4500]display xrn-fabric
Fabric name is 4500 , system mode is L3.
Fabric authentication: no authentication, number of units in stack:
1.
Unit Name Unit ID
First 1(*)
fabric save-unit-id Syntax
fabric save-unit-id
undo fabric save-unit-id
View
User View
Parameter
None
Description
Use the fabric save-unit-id command to save the unit ID of all units in a stack,
into the unit Flash memory and set the priority to 5.
Use the undo fabric save-unit-id command to restore the unit ID of the units
in a stack.
Example
To save the unit ID of all units in a stack to the unit Flash memory, enter the
following:
[4500]display ftm topology-database
Total number of UNITs in fabric : 8, My CPU ID : 4
UID CPU-Mac Prio stacking-port Chips Mid Pid A/M
1 00e0-fc00-5502 10 UP/DOWN 2 0/1 3 A
4 00e0-fc03-5502 10 UP/DOWN 2 6/7 3 A
3 00e0-fc04-5502 10 UP/DOWN 2 4/5 3 A
6 00e0-fc05-5502 10 UP/DOWN 2 10/11 3 A
5 00e0-fc06-5502 10 UP/DOWN 2 8/9 3 A
2 00e0-fc07-5502 10 UP/DOWN 2 2/3 3 A
7 00e0-fc04-6502 10 UP/DOWN 2 12/13 3 A
8 00e0-fc01-5502 10 UP/DOWN 2 14/15 5 A
[4500]quit
<4500>fabric save-unit-id
The unit ID will be saved to the device.
Are you sure? [Y/N] y
%Apr 2 02:13:44:413 2000 3200 FTM/3/DDPFLA:- 4 -Save self unitid,
unit 4 sav
ed UnitID(4) in flash!
Unit 1 saved unit ID successfully.
Unit 2 saved unit ID successfully.