Filter
Top Products
RADIUS Protocol Configuration Commands 281
View
User View
Parameter
None
Description
Use the reset radius statistics command to clear the statistic information related to
the RADIUS protocol.
Related command: display radius.
Example
To clear the RADIUS protocol statistics, enter the following:
<4500>reset radius statistics
reset
stop-accounting-buffer
Syntax
reset stop-accounting-buffer { radius-scheme radius-scheme-name |
session-id session-id | time-range start-time stop-time | user-name
user-name }
View
User View
Parameter
radius-scheme radius-scheme-name: Configures to delete the stopping
accounting requests from the buffer according to the specified RADIUS server
name.
radius-scheme-name specifies the RADIUS server name with a character
string not exceeding 32 characters.
session-id session-id: Configures to delete the stopping accounting requests
from the buffer according to the specified session ID.
session-id specifies the
session ID with a character string not exceeding 50 characters.
time-range start-time stop-time: Configures to delete the stopping
accounting requests from the buffer according to the saving time.
Start-time
specifies the start time of the saving time range and
stop-time specifies the stop
time of the saving time range. The time is expressed in the format
hh:mm:ss-yyyy/mm/dd. When this parameter is set, all the stopping accounting
requests saved since
start-time to stop-time will be deleted.
user-name user-name: Configures to delete the stopping accounting requests
from the buffer according to the username.
User-name specifies the username, a
character string not exceeding 32 characters.
Description
Use the reset stop-accounting-buffer command to reset the stopping
accounting requests, which are saved in the buffer and have not been responded.
By default, after transmitting the stopping accounting requests, if there is no
response from the RADIUS server, the Switch will save the packet in the buffer and