Filter
Top Products
SSH Client Configuration Commands 431
<SW4500>quit
rsa peer-public-key Syntax
rsa peer-public-key key-name
View
System View
Parameter
key-name: The name of the public key of the server, which is a string consisting of
1 to 64 characters.
Description
Use the rsa peer-public-key command to enter the public key view.
Performing this command, you can enter the public key view. Then you can use
the
public-key-code begin command to configure the public key of the server
on the client. The public key of the server is generated by the
rsa
local-key-pair create
command.
Related commands: public-key-code begin, public-key-code end
Example
To enter the public key view named SW4500002, enter the following:
[SW4500]rsa peer-public-key SW4500002
[SW4500-rsa-public-key]
ssh client assign rsa-key Syntax
ssh client { server-ip | server-name } assign rsa-key keyname
undo ssh client server-ip assign rsa-key
View
System View
Parameter
server-ip: The IP address of the SSH server.
server-name: The name of the SSH server, which is a string consisting of 1 to 80
characters.
keyname: The name of the public key of the server, which is a string consisting of
1 to 64 characters.