Filter
Top Products
428 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
Use the undo ssh user username authentication-type command to restore
the default mode in which logon fails.
By default, user cannot logon to the Switch through SSH or TELNET, you need to
specify the authentication type for a new user. The new configuration takes effects
at the next logon.
Related commands: display ssh user-information.
Example
To specify jsmith’s authentication type as password, enter the following:
[SW4500]ssh user jsmith authentication-type password
SSH Client
Configuration
Commands
This section describes the SSH client configuration commands available on your
Switch 4500.
display ssh server-info Syntax
display ssh server-info
View
Any View
Parameter
None
Description
Use the display ssh server-info command to view the corresponding
relationship between the client's public key of the servers and servers.
Example
To display the corresponding relationship between the client's servers and public
keys, enter the following:
[SW4500]display ssh server-info
Server Name(IP) Server public key name
______________________________________________________
192.168.0.1 abc_key01
192.168.0.2 abc_key02
peer-public-key end Syntax
peer-public-key end
View
Public key view