Filter
Top Products
Stack Commands 213
Description
You can use this command to set a name for a device.
Example
To set the name “hello” for the device with unit ID 1, enter the following:
<4500>display xrn-fabric
Fabric name(HostName): 4500
Fabric authentication: md5, Fabric mode: L3, number of units in
stack: 2
Unit Name Unit ID
Hello 1
Second 2(*)
sysname Syntax
sysname sysname
undo sysname
View
System View
Parameter
sysname: A string comprising 1 to 30 characters. By default, the stack name of
Ethernet Switch is 4500.
Description
Use the sysname command to change the name of the stack. The modification
will affect the prompt character in the command line interface. For example, if the
stack name of the Switch is 4500, the prompt character in user view is
<4500>.
Use the undo sysname command to restore the default fabric name.
Example
To change the fabric name of the device to “hello”, enter the following:
<4500>display xrn-fabric
Fabric name(HostName): 4500
Fabric authentication: md5 Fabric mode: L3, number of units in stack:
2
Unit Name Unit ID
First 1
Second (2)*
[4500]sysname hello
[hello]display xrn-fabric
Fabric name(HostName): hello
Fabric authentication md5, Fabric mode :L3, number of units in stack:
2.