Filter
Top Products
ACL Commands List 185
[4500] user-interface vty 0 4
[4500-user-interface-vty0-4] acl 2000 inbound
display acl Syntax
display acl { all | acl-number }
View
All views
Parameter
all: Displays all ACLs.
acl-number: Specifies the sequence number of the ACL to be displayed. It can be
a number chosen from 2000 to 5999.
Description
Use the display acl command to view the detailed configuration information
about the ACL, including every rule, sequence number and the number and byte
number of the packets matched with this rule.
The matched times displayed by this command are software matched times,
namely, the matched times of the ACL to be processed by the Switch CPU.
Example
Display the content of all the ACLs.
<4500>display acl all
Basic acl 2000, 0 rule,match-order is auto
Acl’s step is 1
Advanced ACL 3000, 1 rule
Acl's step is 1
rule 1 permit ip (0 times matched)
display packet-filter Syntax
display packet-filter { interface { interface-name | interface-type
interface-num } | unitid unit-id }
View
Any view
Parameter
interface { interface-name | interface-type interface-num }: Interface
of the Switch, for more detail, please refer to the
port command in this guide.
unitid unit-id: Unit ID. If user inputs this parameter, all the packet-filtering
information of the specified unit will be displayed.
Description
Use the display packet-filter command to view the information of the packet
filter function. The displayed content includes ACL number, subitem name and
activation status.