Filter
Top Products
Log Commands 365
This command takes effect only after the system logging is enabled.
For the related commands, see info-center enable, display info-center.
Example
Send log information to buffer and sets the size of buffer as 50.
<SW4500>system-view
System View: return to User View with Ctrl+Z.
[SW4500]info-center logbuffer 50
[SW4500]
info-center loghost Syntax
info-center loghost host-ip-addr [ channel { channel-number |
channel-name } | facility local-number | language { chinese | english
} ]
undo info-center loghost host-ip-addr
View
System view
Parameter
host-ip-addr: IP address of info-center loghost.
channel: Configure information channel of the info-center loghost.
channel-number: Channel number, ranging from 0 to 9, that is, system has ten
channels.
channel-name: Specify the channel name. The name can be channel6,
channel7, channel8, channel9, console, logbuffer, loghost, monitor,
snmpagent, trapbuffer.
facility: Configure the recording tool of info-center loghost.
local-number: Record tool of info-center loghost, ranging from local0 to local7.
language: Set the logging language.
chinese, english: Language used in log file.
Description
Use the info-center loghost command to set the IP address of the info-center
loghost to send information to it. Use the
undo info-center loghost command
to cancel output to info-center loghost.
By default, switches do not output information to info-center loghost.
This command takes effect only after the system logging is enabled.
For the related commands, see info-center enable, display info-center.