Filter
Top Products
QoS Configuration Commands List 193
Description
Use the display qos-interface mirrored-to command to view the settings of
the traffic mirror.
This command is used for displaying the settings of traffic mirror. The information
displayed includes the ACL of traffic to be mirrored and the observing port.
Related command: mirrored-to.
Example
To display the settings of traffic mirror, enter the following:
<4500> display qos-interface ethernet1/0/1 mirrored-to
Ethernet1/0/1: mirrored-to
Inbound:
Matches: Acl 2000 rule 0 running
Mirrored to: monitor interface
display qos-interface
traffic-limit
Syntax
display qos-interface { interface-name | interface-type
interface-num | unit-id } traffic-limit
View
All views
Parameter
interface-name | interface-type interface-num:: Specifices an Interface of
the Switch, for more information, refer to the
port command in this guide.
unit-id: Unit ID of the Switch.
Description
Use the display qos-interface traffic-limit command to view the traffic
limit settings. If you set the port parameters, the configuration information about
the specified port will be displayed. The information displayed includes the ACL of
the traffic to be limited, the limited average rate and the settings of some related
policing action.
Related commands: traffic-limit.
Example
Display the traffic limit settings.
<4500> display qos-interface ethernet1/0/1 traffic-limit
Ethernet1/0/1: traffic-limit
Inbound:
Matches: Acl 2000 rule 0 running
Target rate: 128 Kbps
Exceed action: remark-dscp 63
line-rate Syntax
line-rate target-rate
undo line-rate