Filter
Top Products
FTP Client Commands 329
230 User logged in
[ftp]passive
% Passive is on
[ftp]
put Syntax
put localfile [ remotefile ]
View
FTP Client view
Parameter
localfile: Local file name.
remotefile: File name on the remote FTP Server.
Description
Use the put command to upload a local file to the remote FTP Server.
If the user does not specify the filename on the remote server, the system will
consider it the same as the local file name by default.
Example
Upload the local file temp.c to the remote FTP Server and saves it as temp1.c.
<SW4500>ftp 1.1.1.1
Trying ...
Press CTRL+K to abort
Connected.
220 FTP service ready.
User(none):hello
331 Password required for hello.
Password:
230 User logged in
[ftp]put temp.c temp1.c
200 Port command okay.
150 Opening ASCII mode data connection for temp1.c.
226 Transfer complete.
FTP: 1709 byte(s) sent in 0.316 second(s) 5.00Kbyte(s)/sec.
[ftp]
pwd Syntax
pwd
View
FTP Client view
Parameter
None
Description
Use the pwd command to display the current directory on the remote FTP Server.