Filter
Top Products
300 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
When the destination filename is the same as that of an existing file, the system
will ask whether to overwrite it.
Example
Display current directory information.
<4500>dir
Directory of unit1>flash:/
0 -rw- 595 Jul 12 2001 19:41:50 test.txt
16125952 bytes total (13975552 bytes free)
Copy the file test.txt and save it as test.bak.
<4500>copy test.txt test.bak
%Copy file unit1>flash:/test.txt to unit1>flash:/test.bak
...Done
Display current directory information.
<4500>dir
Directory of unit1>flash:/
0 -rw- 595 Jul 12 2001 19:41:50 test.txt
1 -rw- 595 Jul 12 2001 19:46:50 test.bak
16125952 bytes total (13974528 bytes free)
delete Syntax
delete [ / unreserved ] file-path
View
User view
Parameter
/unreserved: The file will be deleted permanently if the user chooses this
parameter
file-path: Path and name of the file you want to delete.
Description
Use the delete command to delete a specified file from the storage device of the
Switch.
The deleted files are kept in the recycle bin and will not be displayed when you use
the
dir command. However they will be displayed, using the dir /all command.
The files deleted by the
delete command can be recovered with the undelete
command or deleted permanently from the recycle bin, using the
reset recycle-bin command.
If two files with the same name in a directory are deleted, only the latest deleted
file will be kept in the recycle bin.
Example
Delete the file flash:/test/test.txt
<4500>delete flash:/test/test.txt
Delete unit1>flash:/test/test.txt?[Y/N]:y
%Delete file unit1>flash:/test/test.txt...Done.