Filter
Top Products
MAC Address Table Management Commands 335
When managing the Layer-2 addresses of the switch, the administrator can
perform this command to view such information as the Layer-2 address table,
address status (static or dynamic), Ethernet port of the MAC address, VLAN of the
address, and system address aging time.
For the related commands, see mac-address, mac-address timer.
Example
Show the information of the entry with MAC address at 00e0-fc01-0101
<SW4500>sys
System View: return to User View with Ctrl+Z.
[SW4500]display mac-address 00e0-fc01-0101
MAC ADDR VLAN ID STATE PORT INDEX AGING TIME(s)
00e0-fc01-0101 1 Learned Ethernet1/0/1 300
display mac-address
aging-time
Syntax
display mac-address aging-time
View
All views
Parameter
None
Description
Use the display mac-address aging-time command to display the aging time
of the dynamic entry in the MAC address table.
For the related commands, see mac-address, mac-address timer, display
mac-address
.
Examples
Display the aging time of the dynamic entry in the MAC address table.
<SW4500>sys
System View: return to User View with Ctrl+Z.
[SW4500]display mac-address aging-time
mac-address aging-time: 300s
The above information indicates that the aging time of the dynamic entry in the
MAC address is 300s.
<SW4500>sys
System View: return to User View with Ctrl+Z.
[SW4500] display mac-address aging-time
mac-address aging-time: no-aging
The above information indicates that the dynamic entry in the MAC address table
is no-aging.
mac-address Syntax
mac-address { static | dynamic | blackhole } mac-address interface {
interface-name | interface-type interface-num } vlan vlan-id