Filter
Top Products
Ethernet Port Link Aggregation Commands 65
undo debugging lacp packet [ interface { interface_type
interface_number | interface_name } [ to { interface_type
interface_num | interface_name } ] ]
View
User View
Parameter
interface { interface_type interface_ num | interface_name } [ to {
interface_type interface_ num | interface_name } ]
: Specifies ports. You
can specify multiple sequential ports with the
to parameter, instead of specifying
only one port.
interface_name: Specifies port name, in the format of interface_name =
interface_type interface_num.
interface_type: Specifies port type and interface_num port number.
For more information, see the parameter item for the interface command.
Description
Use the debugging lacp packet command to enable LACP packets debugging at
a designated port or ports. Use the
undo debugging lacp packet command to
disable LACP packets debugging at a designated port or ports.
Example
To enable LACP packets debugging at Ethernet1/0/1, enter the following:
<4500>debugging lacp packet interface ethernet1/0/1
debugging lacp state Syntax
debugging lacp state [ interface { interface_type interface_number |
interface_name } [
to { interface_type interface_num | interface_name
} ] ] { {
actor-churn | mux | partner-churn | ptx | rx }* | all }
undo debugging lacp state [ interface { interface_type
interface_number | interface_name } [ to { interface_type
interface_num | interface_name } ] ] { {
actor-churn | mux |
partner-churn | ptx | rx }* | all
}
View
User View
Parameter
interface { interface_type interface_num | interface_name } [ to {
interface_type interface_num | interface_name } ]:
Specifies ports. You
can specify multiple sequential ports with the
to parameter, instead of specifying
only one port.