Filter
Top Products
362 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
For the related commands, see info-center enable, info-center loghost,
info-center logbuffer, info-center console channel, info-center
monitor channel
.
Example
Show the system log information.
<SW4500>display info-center
Information Center: enabled
Log host:
173.168.1.10, channel number:2, channel name:loghost,
language:english , host facility local:7
Console:
channel number:0, channel name:console
Monitor:
channel number:1, channel name:monitor
SNMP Agent:
channel number:5, channel name:snmpagent
Log buffer:
enabled, max buffer size:1024, current buffer size:256
current messages:6, channel number:4, channel name:logbuffer
dropped messages:0, overwrote messages:0
Trap buffer:
enabled, max buffer size:1024, current buffer size:256
current messages:0, channel number:3, channel
name:trapbuffer
dropped messages:0, overwrote messages:0
Information timestamp setting:
log - date, trap - date, debug - boot
XRN SWITCH OF this Device: LOG = disable; TRAP = disable; DEBUG =
enable
info-center channel
name
Syntax
info-center channel channel-number name channel-name
undo info-center channel channel-number
View
System view
Parameter
channel-number: Channel number, ranging from 0 to 9, that is, system has ten
channels.
channel-name: Specify the channel name with a character string not exceeding
30 characters, excluding "-", "/" or "\".
Description
Use the info-center channel name command to rename a channel specified by
the
channel-number as channel-name. . Using the undo info-center channel
command
, you can restore the channel name.
Note that the channel name cannot be duplicated.