Filter
Top Products
302 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
1 -rw- 248 Aug 29 2000 17:49:36 text.txt
20578304 bytes total (3104544 bytes free)
execute Syntax
execute filename
View
System view
Parameter
filename: Name of the batch file, which is a string up to 256 characters in length,
with a suffix of “.bat”.
Description
Use the execute command to execute the specified batch file.
The batch command executes the command lines in the batch file one by one.
There should be no invisible character in the batch file. If invisible characters are
found, the batch command will quit the current execution. The forms and
contents of the commands are not restricted in the batch file.
Example
To execute the batch file “test.bat” in the directory of “flash:/”, enter the
following:
<4500>sys
System View: return to User View with Ctrl+Z.
[4500]execute test.bat
file prompt Syntax
file prompt { alert | quiet }
View
System view
Parameter
alert: Select confirmation on dangerous file operations.; the default value is
alert.
quiet: No confirmation prompt on file operations.
Description
Use the file prompt command to modify the prompt mode of file operations on
the Switch.
If the prompt mode is set as quiet, so no prompts are shown for file operations,
some non-recoverable operations may lead to system damage.
Example
Configure the prompt mode of file operation as quiet.
<4500>sys
System View: return to User View with Ctrl+Z