Filter
Top Products
356 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
View
This command can be used in the following views:
■ System view
Description
Remote-ping is a network diagnostic tool used to test the performance of
protocols (only ICMP by far) operating on network. It is an enhanced alternative to
the ping command.
Remote-ping test group is a set of remote-ping test parameters. A test group
contains several test parameters and is uniquely identified by an administrator
name plus a test tag.
You can perform an remote-ping test after creating a test group and configuring
the test parameters.
Different from the ping command, remote-ping does not display the round trip
time (RTT) and timeout status of each packet on the console terminal in real time.
You need to execute the display remote-ping command to view the statistic results
of your remote-ping test operation. remote-ping allows administrators to set the
parameters of remote-ping test groups and start remote-ping test operations.
Related Commands
display remote-ping
ping
tracert
display remote-ping Purpose
Use the display remote-ping command to display the test results.
Syntax
display remote-ping { results | history } [ administrator-name
test-tag ]
Parameters
results
Displays the latest test results.
history
Displays the test history.
administrator-name
Name of the administrator who created the test.
test-tag
Test tag.
Example
Display the latest test results of the test group administrator icmp.
<S5500> display remote-ping results administrator icmp
Remote-ping entry(admin administrator, tag icmp) test result: