Filter
Top Products
322 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
View
FTP Client view
Parameter
pathname: Path name.
Description
Use the cd command to change the working path on the remote FTP Server.
This command is used to access another directory on FTP Server. Note that the user
can only access the directories authorized by the FTP server.
Example
Change the working path to flash:/temp
<4500>ftp 1.1.1.1
Trying ...
Press CTRL+K to abort
Connected.
220 FTP service ready.
User(none):hello
331 Password required for hello.
Password:
230 User logged in.
[ftp]cd flash:/temp
250 CWD command successful.
[ftp]
cdup Syntax
cdup
View
FTP Client view
Parameter
None
Description
Use the cdup command to change working path to the upper level directory.
This command is used to exit the current directory and return to the upper level
directory.
Example
Change working path to the upper level directory
<4500>ftp 1.1.1.1
Trying ...
Press CTRL+K to abort
Connected.
220 FTP service ready.
User(none):hello
331 Password required for hello.
Password: