Filter
Top Products
212 CHAPTER 9: USING STACK COMMANDS
Description
Use the ftm stacking-vlan command to specify the stacking VLAN of the
Switch.
Use the undo ftm stacking-vlan command to set the stacking VLAN of the
Switch to its default value.
You should specify the stacking VLAN before the stack is established.
Example
Set VLAN 2 as stacking VLAN:
[4500]ftm stacking-vlan 2
xrn-fabric
authentication-mode
Syntax
xrn-fabric authentication-mode { simple password | md5 key }
undo xrn-fabric authentication-mode
View
System View
Parameter
password: Password, in the range of 1 to 16 characters.
key: Key word, in the range of 1 to 16 characters.
Description
Use the xrn-fabric authentication-mode command to configure or delete the
authentication mode of the fabric.
By default, no authentication mode is configured on the stack.
CAUTION: All units must have the same stack authentication settings in order to
form a stack of units.
Example
To set the authentication mode of the stack to simple, with the password "hello",
enter the following:
[4500]xrn-fabric authentication-mode simple hello
set unit name Syntax
set unit unit-id name unit-name
View
System View
Parameter
unit-id: Unit ID of a device.
unit-name: Unit name of a device. It is a string comprising 0 to 64 characters.