Filter
Top Products
82 CHAPTER 3: USING VLAN COMMANDS
Description
Use the display voice vlan oui command to display the OUI address supported by
the current system and its relative features.
Related commands: voice vlan vlan_id enable, voice vlan enable.
Example
To display the OUI address of Voice VLAN, enter the following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]display voice vlan oui
Oui Address Mask Description
00e0-bb00-0000 ffff-ff00-0000 3com phone
0003-6b00-0000 ffff-ff00-0000 Cisco phone
00e0-7500-0000 ffff-ff00-0000 Polycom phone
00d0-1e00-0000 ffff-ff00-0000 Pingtel phone
00aa-bb00-0000 ffff-ff00-0000 ABC
display voice vlan status Syntax
display voice vlan status
View
Any view
Parameter
None
Description
Use the display voice vlan status command to display the relative Voice
VLAN features including the Voice VLAN status, the configuration mode, the
current Voice VLAN port status etc.
Related commands: voice vlan vlan_id enable, voice vlan enable.
Example
To enable the Voice VLAN on VLAN 2 and display the Voice VLAN status, enter the
following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]display voice vlan status
Voice Vlan status: ENABLE
Voice Vlan ID: 2
Voice Vlan configuration mode: AUTO
Voice Vlan security mode: Security
Voice Vlan aging time: 100 minutes
Current voice vlan enabled port:
--------------------------------
Ethernet1/0/2, Ethernet1/0/3,