Filter
Top Products
3-6 Service Guide
3.4 System Security
System Security
Disk Drive Control
Floppy Disk Drive ------------- [Normal]
Hard Disk Drive --------------- [Normal]
System Boot Drive ------------- [Drive A Then C]
CD-ROM Bootable --------------- [Disabled]
On Board Communication Ports
Serial Port 1 Base Address ---- [3F8h(IRQ 4)]
Parallel Port Base Address ---- [378h(IRQ 7)]
Parallel Port Operation Mode -- [Standard and Bidirectional]
ECP DMA Channel -------------- [0]
Setup Password ------------------- [None]
Power On Password ---------------- [None]
Plug and Play O/S ---------------- [Yes]
OS Legacy Mode Support ----------- [Disabled]
↑↓=Move Highlight Bar, →←=Change Setting, F1=Help, Esc=Exit
3.4.1 Floppy Disk Drive Control
This parameter allows you to enable or disable the read/write functions of the floppy drive. The
following table summarizes the available options.
Table 3-2 Floppy Disk Drive Control Settings
Setting Description
Normal (default) Floppy drive functions normally
Write Protect
Boot Sector
Disables the floppy drive write function on a diskette’s boot sector. This option is
for operating systems that access the floppy drive 100 percent via BIOS only.
Disabled Disables the floppy drive
3.4.2 Hard Disk Drive Control
This parameter allows you to enable or disable the read/write functions of the hard disk drive. The
following table summarizes the available options.
Table 3-3 Hard Disk Drive Control Settings
Setting Description
Normal
(default)
Hard disk drive functions normally
Write Protect
Boot Sector
Disables the hard disk drive write function on the hard disk’s boot sector. This
option is for operating systems that access the hard disk 100 percent via BIOS only.
Disabled Disables the hard disk drive