Filter
Top Products
www.packardbell.com
95
8 Disconnect the cable from the touchpad button board connector.
9 Remove the touchpad button board from the palm rest.
10 Replace the new touchpad button board on the palm rest.
11 Connect the cable to the touchpad button board connector.
12 Replace the screws that was remove in step 7.
13 Reinstall the palm rest by following the instructions in “Replacing the palm
rest” on page 87.
14 Reinstall the LCD panel assembly by following the instructions in “Replacing
the LCD panel assembly” on page 83.
15 Reinstall the keyboard cover by following the instructions in “Replacing the
keyboard cover” procedure on page 79.
16 Reinstall the keyboard by following the instructions in “Replacing the
keyboard” on page 77.
17 If you have disconnected any wireless antennas, reconnect them now.
18 Replace the bay cover, then tighten the cover screws.
19 Reinstall the battery.