Filter
Top Products
www.packardbell.com
75
Replacing the VGA board (for discrete
models)
Tools you need to complete this task:
Screws removed during this task:
• 2 black M2×4 (VGA board)
To replace the VGA board (for discrete models):
1 Complete the steps in “Preparing the notebook” on page 51.
2 Complete the steps in “Removing the bay cover” on page 55.
3 Remove the thermal module by following the instructions in “Replacing the
thermal module” on page 70.
4 Remove the VGA board screws.
Flat-blade driver Scribe or non-marring tool
- OR -
Phillips #0 screwdriver