Filter
Top Products
www.packardbell.com
125
17 Connect the LCD cable to the connector on the new LCD panel and replace
the tapes that might be destroyed when removing the LCD cable.
18 Turn the LCD on its back and secure the left and right LCD bracket with
that screws that were removed in step 12.
19 Place the new LCD on the LCD assembly lid and replace the tape remove
in step 10.
20 Secure the LCD on the LCD assembly lid by replacing the screws that were
remove in step 9.
21 Reconnect the webcam cable.
22 Replace the inverter board by following the instructions in “Replacing the
inverter board” on page 119.
23 Replace the LCD front panel by following the instructions in “Replacing the
LCD front panel” on page 116.
24 Reinstall the LCD panel assembly by following the instructions in “Replacing
the LCD panel assembly” on page 83.
25 Reinstall the keyboard cover by following the instructions in “Replacing the
keyboard cover” procedure on page 79.
26 Reinstall the keyboard by following the instructions in “Replacing the
keyboard” on page 77.
27 If you have disconnected any wireless antennas, reconnect them now.
28 Replace the bay cover, then tighten the cover screws.
29 Reinstall the battery.