Filter
Top Products
CHAPTER 3: Replacing notebook components
98
10 Place the new USB board in the base enclosure; fix it to the latch and secure
it with the screw removed in step 8.
11 Connect the USB board cable to the new USBCN1 on the system board.
12 Reinstall the palm rest by following the instructions in “Replacing the palm
rest” on page 87.
13 Reinstall the LCD panel assembly by following the instructions in “Replacing
the LCD panel assembly” on page 83.
14 Reinstall the keyboard cover by following the instructions in “Replacing the
keyboard cover” procedure on page 79.
15 Reinstall the keyboard by following the instructions in “Replacing the
keyboard” on page 77.
16 If you have disconnected any wireless antennas, reconnect them now.
17 Replace the bay cover, then tighten the cover screws.
18 Reinstall the battery.