Filter
Top Products
CHAPTER 3: Replacing notebook components
86
14 Position the new LCD panel assembly on the notebook, and then secure it
with the hinge screws removed in step 12.
15 If the notebook has a wireless card installed, proceed to step 17 to arrange
the antenna cables.
16 If there’s no wireless card installed, proceed to step 18 .
17 Refer to the antenna cable routing note made on step 10 and secure the
antenna cables to the palm rest before pulling the ends downward to the
notebook base.
18 Arrange the LCD and microphone cables on the palm rest and reconnect
them to their system board connectors.
19 Close the LCD panel and turn the notebook over so the base is facing up.
20 If the notebook has a wireless card installed, reconnect the antenna cables
and then reinstall the bay cover.
21 Return the base hinge screws removed in step 6.
22 Turn the notebook over so the palm rest is facing up.
23 Reinstall the keyboard cover by following the instructions in “Replacing the
keyboard cover” procedure on page 79.
24 Reinstall the keyboard by following the instructions in “Replacing the
keyboard” on page 77.
25 Reinstall the battery.