Filter
Top Products
www.packardbell.com
73
Replacing the CPU
Tools you need to complete this task:
To replace the CPU:
1 Complete the steps in “Preparing the notebook” on page 51.
2 Complete the steps in “Removing the bay cover” on page 55.
3 Remove the thermal module by following the instructions in “Replacing the
thermal module” on page 70.
4 Remove the barcode sticker on top of the processor.
5 Use a flat-blade screw driver to turn the processor lock screw 1/4-turn
counter-clockwise.
Flat-blade driver Scribe or non-marring tool
Phillips #0 screwdriver