Filter
Top Products
www.packardbell.com
83
Replacing the LCD panel assembly
Tools you need to complete this task:
Screws removed during this task:
• 2 black M2.5×8 (LCD panel hinges - bottom)
• 2 black M2.5×8 (LCD panel hinges - top)
To replace the LCD panel assembly:
1 Complete the steps in “Preparing the notebook” on page 51.
2 If the notebook has a wireless card installed, follow step 1 to step 4 in
“Replacing the wireless card” on page 58.
If there’s no wireless card installed, proceed to step 6.
3 Remove the keyboard by following the instructions in “Replacing the
keyboard” on page 77 .
4 Remove the keyboard cover by following the instruction in “Replacing the
keyboard cover” on page 79.
5 Turn the notebook over so the base is facing up.
6 Remove the base screws that secure the LCD panel hinges.
7 Turn the notebook over again so the palm rest is facing up.
Flat-blade driver Scribe or non-marring tool
- OR -
Phillips #0 screwdriver