Filter
Top Products
17
Note: In the above picture under Logic analyzer pods, the first pod goes to the Odd pod
and the second goes to the Even pod of the termination adapter (e.g. Pod B1 goes to
odd termination adapter pod and B2 goes to the even termination adapter pod).
Configuration Files
167xx Analyzer 169xx Analyzer State/Timing Comment
16717/8/9, 1675x 1675x, 1695x, 1691x DR231_1 2 card timing
16717/8/9, 1675x 1675x, 1695x, 1691x DR231_2 3 card state analysis
16717/8/9, 1675x
1675x, 1695x, 1691x
DR231_3
Two Interleaved DDR Banks, 5 cards
required
Timing Analysis (All DDR speeds and supported analyzer cards)
For timing analysis operation you need only two cards (except for the 16760, which
requires four) regardless of supported card type or bus speed. These must be
configured via the cables supplied with the cards as a single logic analyzer module.
Refer to the appropriate Agilent Technologies manual for information on how to connect