Filter
Top Products
25
After clicking “next” you must browse for the fast binary data file you want to import.
Once you have located the file and clicked start import, the data should appear in the
listing.
After the data has been imported you must load the protocol decoder before you will see
any decoding. To load the decoder select Tools from the menu bar, when the drop
down menu appears select Inverse Assembler, then choose the name of the decoder for
your particular product. The figure below is a general picture; please choose the
appropriate decoder for the trace you are working with.
After the decoder has loaded, select Preferences from the overview screen and set the
preferences to their correct value in order to decode the trace properly.
Filtering
The offline IA allows filtering just like the 16700/702 environments. You may filter on
any label, when using the filter tags label you can select symbols to make choosing
transactions easier. To create a filter, choose Tools, New, Filter/Colorize. Then fill in
the information on the window that opens up. You must create a new filter for each item
you want filtered. It is best to filter out transactions you don’t want on the 16700/702
rather than waiting and filtering on the captured data. To remove filters that you no
longer want, go to Tools, Overview and then choose the filter you want removed and
press Delete.