Filter
Top Products
Raven CDMA User Guide for Verizon, version 2.23 107
AT Commands
You can use AT commands to manually trigger an Over-the-Air PRL update.
FIGURE 3. Wireless ACE: Update PRL interface
Generally the PRL will be updated to the one present in the “PRL” folder of
the Wireless ACE installed folder (i.e. C:\Program Files\AirLink\Wireless
Ace 3G\PRL). If the PRL version to apply is displayed as ONLINE, then the
PRL will be updated Over-the-Air (OTA) directly from Verizon.
Attention : If you are using ONLINE updating, your Raven Air-
Link modem needs to be able to contact Verizon’s your cellular
provider’s network for the over-the-air process to be successful.
You may need to move the modem or connect a different
antenna to get a clear strong signal. If you are connected to your
modem remotely, you may incur data charges for the update.
1. Connect to the Raven direct serial communication (page 53).
2. Type AT\APASSTHRU and press Enter to put modem into Pass Thru
Mode.
3. Wait at least 30 seconds to initialize the modem.
4. Type AT!STATUS and press Enter to check the network status: