Filter
Top Products
80 Raven CDMA User Guide for Verizon, version 2.23
*IPMGRKEYn=[key] n= 1 or 2
key = 128-bit
key in hexadeci-
mal [32 hex
characters]
Sets the 128-bit key to use to authenticate the IP update
notifications. If the key's value is all zeros, a default key
will be used. If all the bytes in the key are set to FF, then
no key will be used (i.e. the IP change notifications will
not be authenticated). AT*IPMGRKEY1 is used to set
the key to use with AT*IPMANAGER1, while
AT*IPMGRKEY2 is used to the key with
AT*IPMANAGER2.
*IPMGRUPDATEn=m n= 1 or 2
m=5-255
Sets the number of minutes to periodically send an IP
update notification to the corresponding server. This will
occur even if the IP address of the Raven doesn't change.
*IPMGRUPDATE1 is used to set the refresh rate to
*IPMANAGER1, while *IPMGRUPDATE2 is used
with *IPMANAGER2.
If the value is set to 0, then periodic updates will not be
issued (i.e. IP change notifications will only be sent
when the IP actually changes).
*MODEMNAME=[name] name = domain
name (i.e. eair
-
link.com)
Name of the Raven (up to 20 characters long) to use
when performing IP change notifications to IPManager.
The value in *DOMAIN provides the domain zone to
add to this name.
Example: if *MODEMNAME=mymodem and
*DOMAIN=eairlink.com, then the modem's fully qual
-
ified domain name is mymodem.eairlink.com.
Note: Each modem using IPManager needs a unique
name. Two modems cannot be called “mymodem”. One
could be “mymodem1” with the other as “mymodem”.
Automatically Generated Names:
#I3 - The ESN/IMEI will be used as the name.
#NETPHONE - The phone number be used as the
name.
Note: Only letters, numbers, hyphens, and periods can
be used.
TABLE 14. IP Manager
Command Parameters Details