Filter
Top Products
Raven CDMA User Guide for Verizon, version 2.23 59
TABLE 1. Information and Status
Command Details
I[n]
n=0 Product name (for example, Raven).
n=1 The Raven’s firmware (ALEOS) version, hardware
ID, and copyright.
n=2 The internal hardware's firmware version and relevant
hardware ID.
n=3 The hardware module's unique ID (ESN).
n=5 View active profile (the contents of the active regis-
ters).
&V View active profile (the contents of the active registers).
*HOSTMODE?
The current host mode (AT, PPP, UDP, etc.). If the Raven
is not in AT mode, telnet into the modem to execute this
command.
*NETCHAN? The current active CDMA channel number.
*NETERR? The EVDO or CDMA network frame error rate.
*NETIP? The current IP address of the modem reported by the
embedded OEM module (generally obtained from Car
-
rier). This is the address to which packets can be sent in
order to contact the
Raven from the Internet. Note: If
there is no current network IP, 0.0.0.0 may be displayed.
Use *NETALLOWZEROIP if you need to allow the dis-
play of an IP ending in a zero .
*NETOK Checks the CDMA network connection.
OK if connected.
ERROR if not connected.
*NETPHONE? The modem's phone number (if applicable or obtainable).
*NETRSSI? The current RSSI (Receive Signal Strength Indicator) of
the
Raven as a negative dBm value.
The same information is displayed with the command
S202?.