Filter
Top Products
Raven CDMA User Guide for Verizon, version 2.23 46
CHAPTER 9 Hardware Installation
Your AirLink Raven should be mounted in a position that allows easy access for the
cables so they are not bent or constricted. The LEDs on the front panel should be
visible for ease of operational verification. You should ensure that there is adequate
airflow around the modem but that it is kept free from direct exposure to the ele
-
ments (sun, rain, etc.). The exterior of the case should also be grounded.
An optional accessory for your modem is a mounting kit. The bracket is designed
to snugly cradle the modem and hold it in place where you need it.
See “Mounting
Kit” on page 51.
Connecting the Antenna
Your Raven will work with most standard cellular antennas with a TNC connector
and rated to work with CDMA technology. Connect the antenna or RF cable
directly to the TNC connector on the back of the Raven.
FIGURE 1. Raven connecters