Filter
Top Products
56 Raven CDMA User Guide for Verizon, version 2.23
FIGURE 5. HyperTerminal: AT mode via Telnet
4. Type AT and press Enter. You should get a reply of “OK” or “0”.
5. To see what you are typing as you type it, you will need to turn on the echo and
verbose mode. Type ATE1V1 and press Enter.
If you get a reply of “OK”, then you entered the command successfully. If you get
a reply of “0” or “ERROR”, try entering the command again.
Direct Serial Connection
Using HyperTerminal included with most installations of Microsoft Windows:
Start>All Programs>Accessories>Communications>HyperTerminal
1. Choose a name for your connection, such as Raven or AirLink (if you want to
have a connection saved for both local and remote, it is recommended the con
-
nection name reflect the connection type, i.e. Raven local). The name and icon
are only for your own reference so you can find the connection at a later date.
FIGURE 6. HyperTerminal: Connection Name