Filter
Top Products
Raven CDMA User Guide for Verizon, version 2.23 55
Start>All Programs>Accessories>Communications>HyperTerminal
1. Choose a name for your connection, such as Raven or AirLink. The name and
icon are only for your own reference so you can find the connection at a later
date (if you want to have a connection saved for both local and remote, it is rec
-
ommended the connection name reflect the connection type, i.e. Raven
Remote).
FIGURE 3. HyperTerminal: Connection Name
2. Select TCP/IP (Winsock) for Connect Using. Then, if the modem is connected
directly to your computer’s Ethernet port, put in the host address of
192.168.13.31 or the *HOSTIP. If the modem is remote, the host address will
be the current Internet IP of the Raven. Change the port number to 2332
(default telnet port for the Raven).
FIGURE 4. HyperTerminal: TCP/IP Settings
3. When HyperTerminal connects to the Raven, you may be prompted for a pass-
word. The default password is 12345. When you press Enter, you should get
back a reply of “OK”.